850 nm 10 g rosa pl-xxr-00-s43-c6 key features ? data rates up to 10 gbps ? 3.3 v operation ? -40 c to 85 c operation ? differential output ? isolated case ? received signal strength indicator (rssi) ? lc or sc connectorized pin plus preamplifer the jdsu 850 nm pl-xxr-00-s43-c6 connectorized rosa product (receiver op - tical sub-assembly) is designed for high-speed data communication applications. the product utilizes a gaas pin/tia integrated in a custom hermetic to pack - age. each device is actively aligned to a precision osa housing using a proprietary alignment algorithm and tested to precise requirements. a controlled impedance fex circuit provides the user with optimum performance. the pl-xxr-00-s43-c6 converts optical power into an electrical signal at data rates up to 10 gbps and is engineered for performance over extended operating temperature and power conditions with high reliability. each part is electro-optically tested to insure optimum performance and sensitivity. benefts ? optional controlled impedance fex from osa to pcba for excellent 10 gbps product performance ? industrial operational temperature ? industry standard form factor and size ? modulation performance verifcation north america: 800 498-jdsu (5378) w or l d w ide : +800 5378-jdsu w ebsite: www.jdsu.com c ommunications component s
850 nm 10 g rosa rosa without flex dimensions ( l c) p in symbol function 1 vout p tia output voltage (non-inverted) 2 vdd positive supply voltage 3 rssi receive signal power, avg. current 4 vout n tia output voltage (inverted) 5 gnd ground pl -sxr-00-s43-c6 (no fex) to can assy and barrel 10 max rotational misalignment betwee n 2x 41 2.54 0 2x 82 pin 5 pin 4 pin 1 pin 3 pin 2 0.44 0 3x 2x 0.25 0 barre l keying featur e 0.025 0.83 8 6.59 9 1 45 2.083 0.02 5 2x 5.94 1 units: mm .x = 0. 2 .xx = 0.10 .xxx = 0.050 dwg, datasheet, rosa en g draw n checke d date date date part no . quality procedure 07000056 dimensions are in millimeter s re v louisville, colorado 80027 fx 303-530-4897 d paque t d paque t p bartram 31 oct 06 31 oct 06 01 nov 06 03 drawing no . unless otherwise specified tolerance are: 1480 arthur avenue ph 303-530-318 9 unless otherwise specified must conform to picolight 10g, lc, 4+1, stack pin, ultem optical ref plan e 0.02 5 0.02 5 0.66 0 1.27 0 + - + + - 4.03 9 0.07 6 5.08 0 0.025 0.38 2.92 1 0.05 0 6.50 - 0.2 5 5x 13.460 a a section a-a 4.03 9 4.16 6 45 1 g n e o c e n o i t p i r c s e d v e r dat e c hecked date 1 3 p w d 1 0 5 6 0 0 e s a e l e r l a i t i n i 1 0 oct 06 pb 01 nov 06 02 updated drawing to reflect changes to parent dw g 006785 ak 20 feb 07 da c 2 7 feb 07 corrected pin diameter s 0 07261 db 21 jun 07 cw 21 jun 07 p ad symbol function 1 vcc vcc 2 gnd ground 3 vout p tia output voltage (non-inverted) 4 vout n tia output voltage (inverted) 5 gnd ground 6 rssi receive signal power, avg. current pl -fxr-00-s43-c6 (with fex)
3 850 nm 10 g rosa rosa with flex dimensions (sc) rosa with flex dimensions (sc) rosa with flex dimensions (lc) 0.40 0 6.1 8 -0 .25 + 5 .74 0 .38 6.73 1 - 0.02 5 + 0.05 0 1.21 9 section a-a 6.12 1 6.24 8 b pin 3 pin 4 pin 1 pin 2 pin 5 10.8 0 2 .28 4.84 0 c l pad pitc h 2x 4x 0.3 8 0.4 6 0.9 2 0.71 0 6x 0.8 0 4x 6x 1.12 0 12x 0.30 0 optical ref plan e 0. 5 0.02 5 5x 1.03 5 4.62 3 1 1.09 2 0 .13 a a pad 1 pad 6 barrel keying featur e 10 90 3.12 4 7.26 4 0.05 0 units: mm .x = 0.2 .xx = 0.1 0 .xxx = detail b 0.40 detail b 1.12 0.80 0.92 0.38 0.46 pad pitch 2x 0.71 0.30 section a- a 4.03 9 4.16 6 45.0 0.5 feature pad 6 barrel keying pad 1 0.02 5 0.5 10 2.08 3 90 45.0 0.838 0.02 5 2x 5.94 1 6.59 9 units: mm .x = 0.2 .xx = 0.1 0 .xxx = 0.050 b p in 5 pin 1 pin 3 pin 4 pin 2 2.28 10.8 0 2x 4.84 0 optical ref plan e 0.05 0 1 - 2.92 1 5.08 0 4.03 9 0.02 5 0.02 5 0.13 0.07 6 1.27 0 0.02 5 - 0.5 0.66 0 + + 5x 6.18 - 0 .2 5 +0 .3 8 a a rosa with flex dimensions ( l c)
4 850 nm 10 g rosa p arameter symbol ratings unit storage temperature t st -40 to +100 c incident optical power p in +5 dbm lead solder temperature t s 260 c for 10 sec. 2 mm from case flex attach temperature t f 370 c for 10 sec. power supply voltage v p 4.0 v note: conditions exceeding those listed may cause permanent damage to the device. devices subjected to conditions beyond the limits specifed for extended periods of time may adversely affect reliability. absolute maximum ratings (t case = 30 c , continuous wave (cw) operation unless otherwise stated) shipping information shipped in anti-static stackable trays. p arameter symbol minimum typical maximum unit wavelength responsivity l 840 850 860 nm case operating temperature t op -40 85 c supply voltage v cc 2.97 3.3 3.63 v supply current i cc 34 45 61 ma bandwidth bw 7.5 12 ghz low frequency cutoff 70 khz responsivity (@50 mhz) r 5000 v/w sensitivity (oma) s -13 -12 dbm output resistance r o 100 w optical overload 1.5 dbm differential output voltage v out 285 mv duty cycle distortion 1 10 % rise/fall time t r /t f 20 45 ps slope of rssi vs p in rssi slope 0.9 1 1.1 a/w rssi current with zero input 1 rssi offset 1 ua rssi linearity range rssi range 5 1100 ua 1. connect rssi to ground with a resistor <2500 ohms. electro-optical characteristics ( t case = 30 c , vcc = 3.3 v unless otherwise stated)
north america: 800 498-jdsu (5378) w or l d w ide : +800 5378-jdsu w ebsite: www.jdsu.com product specifcations and descriptions in this document subject to change without notice. ? 2008 jds uniphase corporation 30149329 000 0308 pl-xxr-00-s43-c6.ds.cc.ae march 2008 850 nm 10 g rosa order information for more information on this or other products and their availability, please contact your local jdsu account manager or jdsu directly at 1-800-498-jdsu (5378) in north america and +800-5378-jdsu worldwide or via e-mail at customer.service@jdsu.com. sample: pl-fsr-00-s43-c6 p art number description pl-fsr-00-s43-c6 850 nm 10 g rosa with sc housing, with fex pl-flr-00-s43-c6 850 nm 10 g rosa with lc housing, with fex pl-ssr-00-s43-c6 850 nm 10 g rosa with sc housing, without fex PL-SLR-00-S43-C6 850 nm 10 g rosa with lc housing, without fex
|
